Start the season right by following this PROCOTE checklist.
- Bring Procote to the ideal temperature of 20°C.
- Entire tote must be brought to temperature before agitation and use.
- Check temperature.
- Agitate for 5 - 10 minutes.
- Check temperature again.
- Agitate Procote to create a homogeneous mixture. The visible oil line of separation should disappear, and the thick layer at the bottom should be blended into a consistent mixture before use.
- Test that the pump turns on freely by bumping into manual mode.
- Ensure the scales turn on and are registering accurately.
- Run a check on the heat tape to ensure lins flow properly with product.
- Check the output hose leading to the blender and spray bar. Ensure it is fully open by using air to clean any foreign debris.
- If using Procote in an automated blending system, refer to the blender and automation manuals to properly prime the system.
PROCOTE Applicators
See all application tips on the main page.
back
HEAT
How to maintain the proper (heat) temperature.
Go to HEAT tips
AGITATION
Agitate Procote before each use.
Go to AGITATION tips
CLEANING
How to clean Procote equipment.
Go to CLEANING tips
TOTE TILT
Take a look at our tote tilting recommendations.
Go to TOTE TILTING
COMPATIBILITY
Check out the Procote compatibility matrix.
Go to COMPATIBILITY
ORDER OF APPLICATION
Always apply oil-based product last.
Go to ORDER OF APPLICATION
USE OLDEST PRODUCT FIRST
Tips on how to find the batch number.
Go to USE OLDEST PRODUCT FIRST
STORABILITY
Storability & flowability benefits from PROCOTE.
Go to STORABILITY
PROCOTE Micros vs Biostimulant
Find out the main differences in handling PROCOTE types.
Go to PROCOTE Micros vs Biostimulant